The “STANDARD” series enclosure coolers are available in three sizes, each offered in three performance classes. They feature a compact design and a very high level of efficiency, delivering outstanding performance despite their small size. All enclosure coolers in the “STANDARD” series are equipped with overheating protection and an alarm relay. The exterior has been designed to meet IP-67 protection standards.
We offer the “STANDARD” series units in various sizes and performance classes. You can use the table to determine which version is suitable for your application. Alternatively, you can use our calculation tool. Detailed datasheets for our units can be found in our download section.
Special configurations are also available, e.g. thermostat-controlled duty cycle, switching option to heating mode, etc. Please review the configuration options or contact us to receive a customized quotation!
Please select the desired configuration.
50W | FL-104-C
70W | FN-104-C
100W | FR-104-C
Our size 1 enclosure coolers are specifically designed for use in smaller control cabinets. However, they offer all the advantages that also characterize our larger enclosure coolers, such as installation in any orientation, quick commissioning via simple electrical connection, or interchangeability with, for example, a higher-capacity enclosure cooler of the same size. Size 1 enclosure coolers achieve high usable performance thanks to their high efficiency combined with a cost-effective price. The exterior of all our “STANDARD” enclosure coolers is designed as standard to protection class IP-68.
Please select the desired configuration.
100W | FL-208-C
140W | FN-208-C
200W | FR-208-C
Our size 2 enclosure coolers are designed for use in medium-sized control cabinets. They can be installed in any orientation and ensure quick commissioning via a simple electrical connection. Due to identical external and connection dimensions, all size 2 enclosure coolers are fully interchangeable. . This allows you to replace your enclosure cooler, if required, with a unit of the same size but higher performance.. The exterior of all our “STANDARD” enclosure coolers is manufactured as standard to protection class.8 IP-68. Detailed datasheets for our devices can be found in our download section.
Special configurations are also available, e.g. thermostat-controlled duty cycle, switching option to heating mode, etc. Please review the configuration options or contact us to receive a customized quotation!
Our Peltier enclosure coolers of the STANDARD series are available with stainless steel and anodized aluminum covers to meet your specific application requirements. For applications such as desert regions, a version with a particularly robust sandstorm cover is also available. To ensure maximum efficiency as well as very low vibration and noise levels, we use high-quality dual ball-bearing fans, which can also be supplied with speed control upon request. To protect your system and the enclosure cooler from overheating in the event of a fault, our units are equipped with a monitoring and alarm system.
High-performance fans
Low noise and vibration despite a strong output of 4.0 m³/min (free-blowing).
Installation in any orientation
Flexible mounting options for your enclosure cooler.
Cooling & heating function
To meet any situation.
Integrated alarm system
Protects your system and the cooler from overheating in the event of a fault.
Our enclosure coolers are characterized by a particularly high COP efficiency. To achieve this, we use highly efficient and robust Peltier modules. These not only ensure the required efficiency, but also exhibit, due to their GL-II structure, an extreme cycle durability and durability. The internal heat exchangers can be supplied in clear or black anodized finishes, providing enhanced resistance to environmental influences when required. To prevent the formation of condensation and thereby avoid potential damage, our enclosure coolers can additionally be equipped with a patented condensate drainage channel.
In addition, all our units are manufactured in compliance with RoHS and REACH standards and can also be produced LABS-free upon request.
Please select the desired configuration.
200W | FL-316-C
280W | FN-316-C
400W | FR-316-C
The size 3 enclosure coolers are specifically designed for use in large control cabinets with high heat dissipation requirements. This “premium class” of enclosure coolers is therefore equipped with two finned heat sinks on the inside of the control cabinet. Here as well, installation in any orientation, quick commissioning, and interchangeability due to identical connection dimensions and the same housing size are ensured. As a special version, the power input can be increased up to 800 watts. The exterior of all our “STANDARD” enclosure coolers is manufactured as standard in protection class IP68. Detailed datasheets for our devices can be found in our download section.
Special configurations are also available, e.g. thermostat-controlled duty cycle, switching option to heating mode, etc. Please review the configuration options or contact us to receive a customized quotation!
Our Peltier enclosure coolers of the STANDARD series are available with stainless steel and anodized aluminum covers to meet your specific application requirements. For applications such as desert regions, a version with a particularly robust sandstorm cover is also available. To ensure maximum efficiency as well as very low vibration and noise levels, we use high-quality dual ball-bearing fans, which can also be supplied with speed control upon request. To protect your system and the enclosure cooler from overheating in the event of a fault, our units are equipped with a monitoring and alarm system.
2 × 50 W fans
For particularly effective ventilation and air circulation.
Cooling fins
For efficient heat dissipation.
Our enclosure coolers are characterized by a particularly high COP efficiency. To achieve this, we use highly efficient and robust Peltier modules. These not only ensure the required efficiency but, due to their GL-II structure, also provide extreme cycle stability and long service life. The internal heat exchangers can be supplied in clear or black anodized finishes, providing enhanced resistance to environmental influences when required. To prevent the formation of condensation and thus potential damage, our enclosure coolers can additionally be equipped with a patented condensate drainage channel.
In addition, all our units are manufactured in compliance with RoHS and REACH standards and can also be produced LABS-free upon request.
Do not hesitate to contact us so our experts can advise you on which product provides the most efficient solution for your application.
Our Peltier enclosure coolers of the “STANDARD” series are available with stainless steel and anodized aluminum covers to meet your specific application requirements. For applications such as desert regions, a version with a particularly robust sandstorm cover is also available. To ensure the highest possible efficiency as well as very low vibration and noise levels, we use high-quality dual ball-bearing fans, which can also be supplied with adjustable speed control upon request. To protect your system and the enclosure cooler from overheating in the event of a fault, our units are equipped with a monitoring and alarm system.
Compact design
Efficient use of your available installation space.
High-performance fans
Low noise and vibration despite a strong output of 4.0 m³/min (free-blowing).
IP-67 protection
Protection rating IP-67 for maximum durability and longevity
Integrated alarm system
Protects your system and the cooler from overheating in the event of a fault.
Our enclosure coolers are characterized by a particularly high COP efficiency. To achieve this, we use highly efficient and robust Peltier modules. These not only ensure the required efficiency but, due to their GL-II structure, also provide extreme cycle stability and long service life. The internal heat exchangers can be supplied in clear or black anodized versions, making them especially resistant to environmental influences when required. To prevent the formation of condensation and thus avoid potential damage, our enclosure coolers can additionally be equipped with a patented condensate drainage channel.
In addition, all our units are manufactured in compliance with RoHS and REACH standards and can also be produced LABS-free upon request.
