Switch cabinet cooler series HL

Our Peltier switch cabinet coolers of the HL series are specially designed for applications with particularly high requirements and therefore operate in a temperature range of -40° – 90° Celsius. Of course, the switch cabinet coolers of the HL series also offer the advantages of our standard switch cabinet coolers, such as installation in any position, quick commissioning through simple electrical connection or the exchangeability with a more powerful switch cabinet cooler of the same size. The outside of our “HL” switch cabinet coolers is designed with IP67 protection as standard to meet the requirements of particularly high ambient temperatures.

Switch cabinet cooler series HL

Versions

We offer the devices of the Standard series in different sizes and performance classes. You can determine which version is suitable for your application using the table. Alternatively you can use our calculation tool. The detailed data sheets for our devices can be found in our download area.

Special equipment is also available, e.g., thermostat-controlled duty cycle, switchover option to heating mode, etc. Please check the configuration options or contact us to receive an individual offer!

ModelSize 1Size 2Size 3
Size195 x 132 x 154 mm268 x 195 x 154 mm390 x 269 x 154 mm
Weight3 kg6 kg10 kg
Operating temperature-40°C – 90°C-40°C – 90°C-40°C – 90°C
Supply voltage24 V24 V24 V
Nominal power50W

70W

100W

100W

140W

200W

200W

280W

400W

Switch cabinet cooler series HL

Switch cabinet cooler series HL size 1

  • Weight: 3 kg
  • Size: 195 x 132 x 154 mm
  • Operating temperature: -40 - 90°
  • Protection category: IP68
  • Supply voltage: 24 V
  • Nominal power: 50W

Data sheet HL-104-C

494,49€

plus 19% value added tax.
incl. shipping & charges

Reliable control cabinet cooling

Our HL series Peltier switch cabinet coolers are available with stainless steel and anodized aluminum hoods to meet your specific application. For application areas such as desert regions, a version with a particularly robust sand storm hood is also possible. In order to ensure the highest possible degree of efficiency as well as a very low vibration and noise operation, we use high-quality, 2-fold ball-bearing mounted fans, which can also be supplied controllable on request. In order to protect your plant as well as the switch cabinet cooler from overheating in case of a breakdown, our units are equipped with a monitoring and alarm system.

1
2
Switch cabinet cooler series HL
1

Maximum application range

Ambient temperatures of up to 90 degrees are possible without problems

2

Powerful fans

low-noise & low-vibration despite high output of 4.0 m³/min (free blowing)

1
2
Switch cabinet cooler series HL
1

Integrated alarm system

Protects your system and the cooler from overheating in case of a malfunction

2

Compact design

How to use your available installation space efficiently

Particularly high COP efficiency

Our switch cabinet coolers are characterized by a particularly high COP efficiency. To achieve this, we use highly efficient and robust Peltier modules. These not only ensure the required efficiency, but also have an extreme cycle stability and long service life due to their GL-II structure. If required, the internal heat exchangers can be supplied colorless or black anodized, making them particularly robust against environmental influences. In order to avoid the formation of condensation water and thus possible damage, our switch cabinet coolers can also be equipped with a condensate drain channel.

In addition, all our units are ROHS and REACH compliant and can also be manufactured LABS-free if required.

Switch cabinet cooler series HL

Switch cabinet cooler series standard size 2

  • Weight: 5 kg
  • Size: 268 x 195 x 154 mm
  • Operating temperature: -40 - 90°
  • Protection category: IP68
  • Supply voltage: 24 V
  • Nominal power: 100W

Data sheet HL-208-C

887,46€

plus 19% value added tax.
incl. shipping & charges

Reliable switch cabinet cooling

Our HL series Peltier switch cabinet coolers are available with stainless steel and anodized aluminum hoods to meet your specific application. For application areas such as desert regions, a version with a particularly robust sand storm hood is also possible. In order to ensure the highest possible degree of efficiency as well as a very low vibration and noise operation, we use high-quality, 2-fold ball-bearing mounted fans, which can also be supplied controllable on request. In order to protect your plant as well as the switch cabinet cooler from overheating in case of a breakdown, our units are equipped with a monitoring and alarm system.

1
2
Switch cabinet cooler series HL
1

Maximum application range

Ambient temperatures of up to 90 degrees are possible without problems

2

IP-67 protection

Protection class IP-67 for maximum robustness and durability

1
2
Switch cabinet cooler series HL
1

Integrated alarm system

Protects your system and the cooler from overheating in case of a malfunction

2

Powerful fans

low-noise & low-vibration despite high output of 4.0 m³/min (free blowing)

Particularly high COP efficiency

Our switch cabinet coolers are characterized by a particularly high COP efficiency. To achieve this, we use highly efficient and robust Peltier modules. These not only ensure the required efficiency, but also have an extreme cycle stability and long service life due to their GL-II structure. If required, the internal heat exchangers can be supplied colorless or black anodized, making them particularly robust against environmental influences. In order to avoid the formation of condensation water and thus possible damage, our switch cabinet coolers can also be equipped with a condensate drain channel.

In addition, all our units are ROHS and REACH compliant and can also be manufactured LABS-free if required.

Switch cabinet cooler series HL

Switch cabinet cooler series standard size 3

  • Weight: 10 kg
  • Size: 390 x 269 x 154 mm
  • Operating temperature: -40 - 90°
  • Protection category: IP68
  • Supply voltage: 24 V
  • Nominal power: 200W

Data sheet HL-316-C

1705,30€

plus 19% value added tax.
incl. shipping & charges

Reliable and accurate control cabinet cooling

Our HL series Peltier switch cabinet coolers are available with stainless steel and anodized aluminum hoods to meet your specific application. In order to ensure the highest possible degree of efficiency as well as a very low vibration and noise operation, we use high-quality, 2-fold ball-bearing mounted fans, which can also be supplied controllable on request. In order to protect your plant as well as the switch cabinet cooler from overheating in case of a breakdown, our units are equipped with a monitoring and alarm system.

1
2
Switch cabinet cooler series HL
1

Maximum application range

Ambient temperatures of up to 90 degrees are possible without problems

2

Powerful fans

low-noise & low-vibration despite high output of 4.0 m³/min (free blowing)

1
2
Switch cabinet cooler series HL
1

Integrated alarm system

Protects your system and the cooler from overheating in case of a malfunction

2

Cooling & heating function

To meet every situation

Particularly high COP efficiency

Our switch cabinet coolers are characterized by a particularly high COP efficiency. To achieve this, we use highly efficient and robust Peltier modules. These not only ensure the required efficiency, but also have an extreme cycle stability and long service life due to their GL-II structure. If required, the internal heat exchangers can be supplied colorless or black anodized, making them particularly robust against environmental influences. In order to avoid the formation of condensation water and thus possible damage, our switch cabinet coolers can also be equipped with a condensate drain channel.

In addition, all our units are ROHS and REACH compliant and can also be manufactured LABS-free if required.

Interested?

We have the right solution for you! Do not hesitate to ask our experts to advise you which product is the most suitable for your application. 

or give us a call:

+49 89 72481500

Secure connection

Our store communicates with a 256-bit encryption

Flexible payment options

Switch cabinet cooler series HLSwitch cabinet cooler series HLSwitch cabinet cooler series HLSwitch cabinet cooler series HL

Insured shipping from 500€ order value

Switch cabinet cooler series HL

Audited data protection

Switch cabinet cooler series HL

Contact us

We will find a solution for your application! Do not hesitate to ask our experts to advise you which product will bring you the greatest benefit.  

  • info@dr.neumann-peltier.de

  • +49 (0) 89 72481500

  • Gautinger Straße 45, 82061 Neuried

    By using this form, you consent to the storage and processing of your data in accordance with the data protection declaration. (required)