Surface cooler

Our surface coolers expand the range of applications for Peltier temperature control technology and enable reliable and accurate cooling and heating of surfaces, liquids, containers and of course a wide variety of other materials.

  • Precise cooling and heating of control cabinets without cutting into the cabinet

  • Custom-made products possible

  • Made in Germany

Surface cooler
 
Switch cabinet cooling
Switch cabinet cooling
Switch cabinet cooling
Switch cabinet cooling
Switch cabinet cooling
Switch cabinet cooling

Serial products

For many applications you can already find suitable devices in our standard range.

  • for temperatures from -40°C to 90°C
  • up to protection class IP 67
  • suitable for different supply voltages

Your individual surface cooler

With our products, Modular can meet almost any requirement. You are welcome to use our configurator to find the right solution for you.

If none of our series products is suitable for your application, we will be happy to manufacture a solution exactly according to your ideas.

Versions

We offer the devices in different sizes and performance classes. You can determine which version is suitable for your application using the table. Alternatively you can use our calculation tool. The detailed data sheets for our devices can be found in our download area.

Special equipment is also available, e.g., thermostat-controlled duty cycle, switchover option to heating mode, etc. Please check the configuration options or contact us to receive an individual offer!

ModelSize 1Size 2Size 3
Size225 x 160 x 84 mm290 x 225 x 84,5 mm420 x 290 x 85 mm
Weight3 kg6 kg12 kg
Operating temperature-40°C – 70°C-40°C – 70°C-40°C – 70°C
Supply voltage24 V24 V24 V
Nominal power50W
70W
100W

100W
140W
200W

200W
280W
400W

Surface cooler

Surface cooler size 1

  • Weight: 3 kg
  • Size: 225 x 160 x 84 mm
  • Operating temperature: -40°C – 70°C
  • Protection class: IP67
  • Supply voltage: 24 V
  • Nominal power: 50W | 70W | 100W

Please select the desired version.

 

Data sheet 50W (GL-104-C)

454,00€

plus 19% value added tax.
incl. shipping & charges

Data sheet 70W (GN-104-C)

465,00€

plus 19% value added tax.
incl. shipping & charges

Data sheet 100W (GR-104-C)

495,00€

plus 19% value added tax.
incl. shipping & charges

Our size 1 surface coolers are suitable for applications in small control cabinets or low cooling capacity. Our surface coolers can be used to cool and heat not only switch cabinets but also liquids, containers, samples and other materials efficiently. Due to the direct contact to the surface to be tempered, our surface coolers work particularly efficiently. Our size 1 surface coolers are available in three different power levels from 50W up to 100W. Like all our Peltier cooling units, our size 1 Peltier surface coolers offer all the advantages of Peltier technology, such as installation in any position and refrigerant-free operation. The outside of our surface coolers are designed in protection class IP-67. All our surface coolers are supplied with a flexible heat conducting foil as standard to ensure the best possible thermal contact even with surfaces that are not completely flat. The detailed data sheets for our devices can be found in our download area.

Special equipment is also available, e.g. stainless steel hoods, thermostat-controlled duty cycle, switch-over option to heating mode and much more. Please check the configuration possibilities or contact us to receive an individual offer!

Reliable switch cabinet cooling

Our Peltier surface coolers, like our Peltier switch cabinet coolers, are available with hoods made of stainless steel as well as anodized aluminum to meet your specific application. In order to ensure the highest possible efficiency and quiet operation, we use high-quality, 2-fold ball-bearing mounted fans, which can also be supplied controllable on request. In order to protect your plant as well as your technology and the surface cooler from overheating in case of a malfunction, our Peltier surface coolers are equipped with an alarm system. Furthermore, our Peltier surface coolers are designed with IP-67 protection on the outside as standard, in order to protect your device as best as possible against exogenous environmental influences.

1
2
Surface cooler
1

Leistungsstarke Lüfter

geräusch- & vibrationsarm trotz starker Leistung von 4,0 m³/min (freiblasend)

2

Kompakte Bauart

So nutzen Sie Ihren verfügbaren Bauraum effizient

1
2
Surface cooler
1

Flexible Wärmeleitfolie

Optimaler thermischer Kontakt auch bei nicht perfekt ebenen Flächen 

2

Schnittlose Schrankkühlung 

Temperierung ohne Einschnitte in das Schrankinnere vorzunehmen 

Especially high COP efficiency

Like our Peltier switch cabinet cooler, our surface coolers are characterized by a particularly high COP efficiency. In order to achieve this, we supply our Peltier surface coolers with a flexible heat-conducting foil as standard, which creates the optimum thermal contact with the surface to be cooled, even if it is not perfectly flat. In addition, we use extremely cycle-resistant and durable Peltier modules with GL-II construction. If required, the external heat exchanger can also be supplied in black or colorless anodized design.

In addition, all our Peltier surface coolers are ROHS and REACH compliant and can also be manufactured LABS-free if required.

Surface cooler

Surface cooler size 2

  • Weight: 6 kg
  • Size: 290 x 225 x 84,5 mm
  • Operating temperature: -40°C – 70°C
  • Protection class: IP 67
  • Supply voltage: 24 V
  • Nominal power: 100W | 140W | 200W

Please select the desired version.


Data sheet 100W (GR-208-C)

859,00€

plus 19% value added tax.
incl. shipping & charges

Data sheet 140W (GN-208-C)

879,00€

plus 19% value added tax.
incl. shipping & charges

Data sheet 200W (GL-208-C)

899,00€

plus 19% value added tax.
incl. shipping & charges

Our size 2 surface coolers are suitable for applications in medium-sized switch cabinets or medium cooling capacity. Our surface coolers can be used to cool and heat not only switch cabinets but also liquids, containers, samples and other materials efficiently. Due to the direct contact to the surface to be tempered, our surface coolers work particularly efficiently. Our size 2 surface coolers are available in three different power levels from 100W up to 200W. Like all our Peltier cooling units, our size 2 Peltier surface coolers offer all the advantages of Peltier technology, such as installation in any position and refrigerant-free operation. The outside of our surface coolers are designed in protection class IP-67. All our surface coolers are supplied with a flexible heat conducting foil as standard to ensure the best possible thermal contact even with surfaces that are not completely flat. You can find detailed data sheets for our devices in our download area.

Special equipment is also available, e.g. stainless steel hoods, thermostat-controlled duty cycle, switch-over option to heating mode and much more. Please check the configuration possibilities or contact us to receive an individual offer!

Surface cooling reliable and accurate

Our Peltier surface coolers, like our Peltier switch cabinet coolers, are available with hoods made of stainless steel as well as anodized aluminum to meet your specific application. In order to ensure the highest possible efficiency and quiet operation, we use high-quality, 2-fold ball-bearing mounted fans, which can also be supplied controllable on request. In order to protect your plant as well as your technology and the surface cooler from overheating in case of a malfunction, our Peltier surface coolers are equipped with an alarm system. Furthermore, our Peltier surface coolers are designed with IP-67 protection on the outside as standard, in order to protect your device as best as possible against exogenous environmental influences.

1
2
Surface cooler
1

Leistungsstarke Lüfter

geräusch- & vibrationsarm trotz starker Leistung von 4,0 m³/min (freiblasend)

2

IP-67 Schutz

Schutzart IP-67 für maximal Robustheit und Lebensdauer

1
2
Surface cooler
1

Flexible Wärmeleitfolie

Optimaler thermischer Kontakt auch bei nicht perfekt ebenen Flächen

2

ROHS und REACH konform

Verzicht auf den Verbau gefährlicher Stoffe nach EU-Richtlinien

Especially high COP efficiency

Like our Peltier switch cabinet cooler, our surface coolers are characterized by a particularly high COP efficiency. In order to achieve this, we supply our Peltier surface coolers with a flexible heat-conducting foil as standard, which creates the optimum thermal contact with the surface to be cooled, even if it is not perfectly flat. In addition, we use extremely cycle-resistant and durable Peltier modules with GL-II construction. If required, the external heat exchanger can also be supplied in black or colorless anodized design.

In addition, all our Peltier surface coolers are ROHS and REACH compliant and can also be manufactured LABS-free if required.

Surface cooler

Surface cooler size 3

  • Weight: 10 kg
  • Size: 420 x 290 x 85 mm
  • Operating temperature: -40°C – 70°C
  • Protection class: IP67
  • Supply voltage: 24 V
  • Nominal power: 200W | 280W | 400W

Please select the desired version.

Data sheet 200W (GL-316-C)

1.395,00€

plus 19% value added tax.
incl. shipping & charges

Data sheet 280W (GN-316-C)

1.420,00 €

plus 19% value added tax.
incl. shipping & charges

Data sheet 400W (GR-316-C)

1.485,00€

plus 19% value added tax.
incl. shipping & charges

Our size 3 surface coolers are suitable for applications in large control cabinets or high cooling capacity. Our surface coolers can be used to cool and heat not only switch cabinets but also liquids, containers, samples and other materials efficiently. Due to the direct contact to the surface to be tempered, our surface coolers work particularly efficiently. Our size 3 surface coolers are available in three different power levels from 200W up to 400W. Like all our Peltier cooling units, our size 3 Peltier surface coolers offer all the advantages of Peltier technology, such as installation in any position and refrigerant-free operation. The outside of our surface coolers are designed in protection class IP-67. All of our surface coolers are supplied with a flexible heat conducting foil as standard to ensure the best possible thermal contact even with surfaces that are not completely flat. You can find detailed data sheets for our devices in our download area. 

Special equipment is also available, e.g. stainless steel hoods, thermostat-controlled duty cycle, switch-over option to heating mode and much more. Please check the configuration possibilities or contact us to receive an individual offer!

Surface cooling reliable and accurate

Our Peltier surface coolers, like our Peltier switch cabinet coolers, are available with hoods made of stainless steel as well as anodized aluminum to meet your specific application. In order to ensure the highest possible efficiency and quiet operation, we use high-quality, 2-fold ball-bearing mounted fans, which can also be supplied controllable on request. In order to protect your plant as well as your technology and the surface cooler from overheating in case of a malfunction, our Peltier surface coolers are equipped with an alarm system. Furthermore, our Peltier surface coolers are designed with IP-67 protection on the outside as standard, in order to protect your device as best as possible against exogenous environmental influences.

1
2
Surface cooler
1

Schnittlose Schrankkühlung 

Temperierung ohne Einschnitte in das Schrankinnere vorzunehmen 

2

Leistungsstarke Lüfter

Geräusch- & vibrationsarm trotz starker Leistung von 4,0 m³/min (freiblasend) 

1
2
Surface cooler
1

Flexible Wärmeleitfolie

Optimaler thermischer Kontakt auch bei nicht perfekt ebenen Flächen 

2

Direktkontakt

Hohe Effizienz durch direkten thermischen Kontakt zur Baugruppe 

Especially high COP efficiency

Like our Peltier switch cabinet cooler, our surface coolers are characterized by a particularly high COP efficiency. In order to achieve this, we supply our Peltier surface coolers with a flexible heat-conducting foil as standard, which creates the optimum thermal contact with the surface to be cooled, even if it is not perfectly flat. In addition, we use extremely cycle-resistant and durable Peltier modules with GL-II construction. If required, the external heat exchanger can also be supplied in black or colorless anodized design.

In addition, all our Peltier surface coolers are ROHS and REACH compliant and can also be manufactured LABS-free if required.

Interested?

We have the right solution for you! Do not hesitate to ask our experts to advise you which product is the most suitable for your application. 

Secure connection

Our store communicates with a 256-bit encryption

Flexible payment options

Surface coolerSurface coolerSurface coolerSurface cooler

Insured shipping from 500€ order value

Surface cooler

Audited data protection

Surface cooler

Contact us

We will find a solution for your application! Do not hesitate to ask our experts to advise you which product will bring you the greatest benefit.  

    By using this form, you consent to the storage and processing of your data in accordance with the data protection declaration. (required)